Electrochemical performance of in situ LiFePO4 modified by N-doped graphene for Li-ion batteries

LiFePO₄ modified by N-doped graphene (NG) with a three-dimensional conductive network structure was synthesized via a one-step in situ hydrothermal method. The effects of N amount of NG on the phase structure, morphology, and electrochemical properties of LiFePO₄ are investigated in this study. X-ray diffraction (XRD) results show that doping suitable N amounts in NG do not alter the crystal structure of LiFePO_4, and scanning electron microscopy (SEM) images show that NG can slightly reduce the particle size of LiFePO₄. The high-resolution transmission electron microscopy (HRTEM) results show that the LiFePO₄ particles are well covered and connected by NG. The electrochemical performance confirms that LiFePO₄ modified by 20% N-doped graphene (named LFP/NG-4) displays a perfect specific capacity of 166.6 mAh·g^?1 at a rate of 0.2C and can reach 125 mAh·g^?1 at a rate of 5 C. Electrochemical impedance spectroscopy (EIS) results illustrate that the charge transfer resistance value of the LFP/NG-4 composite is only 58.6 Ω, which is very low compared with LiFePO₄. Cyclic voltammetry (CV) tests indicate that the addition of 20% N-doped graphene can effectively reduce electrode polarization and improve reversibility. The LFP/NG-4 composite with a three-dimensional conductive network structure can be regarded as a promising cathode material for Li-ion batteries.     

Nb2O5-doped NiZnCo ferrite ceramics with ultra-high magnetic quality factor and low coercivity for high-frequency electronic devices

This work investigates the influence of niobium pentoxide (Nb₂O₅) as dopant, on the structural, magnetic, and dielectric properties of NiZnCo ferrites. The results showed that Nb₂O₅ was an effective dopant, and the Nb⁵⁺ ions entered the B site to replace Fe³⁺ ions, which altered the electromagnetic properties of the NiZnCo ferrite. In particular, the coercivity (H_c) was 20～24 Oe, and the magnetic quality factor (Q), was more than 200 at x = 0 and x = 0.1 wt%, which is 4～5 times higher than that of NiZn and NiCuZn ferrites. Excellent electromagnetic properties were obtained for 0.1 wt% Nb₂O₅-doped NiZnCo ferrite, i.e., M_s = 88.3 emu/g, H_c =20.4 Oe, ρ = 2.4 × 10⁵ Ω m and Q = 202 @20 MHz. These excellent electromagnetic properties of Nb₂O₅-doped NiZnCo ferrites could be potentially applied to resonators and capacitors at high frequency.     

基于SCA波形采样读出电子学的CSNS Back-n中子飞行时间测量

中国散裂中子源(CSNS)反角白光中子束线(Back-n)对中子核数据测量和核技术应用等多个领域均有重要意义。为监测其中子束斑轮廓、束流密度及束流能量，研制了由镀硼微网格气体(Micromegas)探测器构成的束流剖面监测装置，并通过测量中子的飞行时间(TOF)来获得能量信息。采用基于开关电容阵列(SCA)专用集成电路(ASIC)的波形采样电子学系统，实现了128路Micromegas探测器阳极条信号的低噪声放大、成形和波形数字化，在现场可编程逻辑门阵列(FPGA)芯片中实现了对信号过阈时间的实时测量，其量程为650 ns～10 ms，电子学时间分辨好于10 ns。在CSNS Back-n上开展实验，成功获得了中子束流剖面及10.65 μs～10 ms范围的飞行时间谱，对应的中子能量范围约为0.16 eV～0.14 MeV。利用钽、钴等吸收体进行了中子共振吸收峰的检验，验证了读出电子学系统的功能及飞行时间测量的正确性。     

安徽开发矿业有限公司布料小车自动化升级改造

针对磨矿仓布料小车倒仓下料为远程半自动化模式，操作频繁且容易发生故障等问题，对布料小车进行了全自动布料的研究。通过对布料小车装置的机械、电气等自动化控制改造，解决了远程半自动化布料，实现了布料小车全自动化布料功能。     

虚拟机Windows 10的软RAID配置与恢复

磁盘阵列(RAID)具有提高计算机读写数据的速度、实现对数据的冗余保护及保证数据存储可靠性的功能。本文介绍利用在虚拟机Windows 10客户机添加两个磁盘进行软件RAID的配置,以及模拟磁盘损坏和RAID1恢复的方法。该方法中的RAID1可以保证普通用户数据存储的可靠性,适用性强。     

Recent progress of green sorbents-based technologies for low concentration CO2 capture

The increased concentration of CO₂ due to continuous breathing and no discharge of human beings in the manned closed space, like spacecraft and submarines, can be a threat to health and safety. Effective removal of low concentration CO₂ from the manned closed space is essential to meet the requirements of long-term space or deep-sea exploration, which is an international frontier and trend. Ionic liquids (ILs), as a widespread and green solvent, already showed its excellent performance on CO₂ capture and absorption, indicating its potential application in low concentration CO₂ capture. In this review, we first summarized the current methods and strategies for direct capture from low concentration CO₂ in both the atmosphere and manned closed spaces. Then, the multi-scale simulation methods of CO₂ capture by ionic liquids are described in detail, including screening ionic liquids by COSMO-RS methods, capture mechanism by density functional theory and molecular dynamics simulation, and absorption process by computational fluid dynamics simulation. Lastly, some typical IL-based green technologies for low concentration CO₂ capture, such as functionalized ILs, co-solvent systems with ILs, and supported materials based on ILs, are introduced, and analyzed the subtle possibility in manned closed spaces. Finally, we look forward to the technology and development of low concentration CO₂ capture, which can meet the needs of human survival in closed space and proposed that supported materials with ionic liquids have great advantages and infinite possibilities in the vital area.     

5500 m3高炉高产操作实践

分析了首钢京唐公司1#、2#两座5 500 m~3高炉开炉后快速达产、高产情况。选取连续10天以上日产量完成13 000 t的4个典型阶段,研究了高炉主要技术经济指标与操作制度的对应情况关系,总结提炼了操作经验和冶炼参数,为大型高炉高产、稳产提供了参考。     

高钛型高炉渣光催化材料研究进展

本文简介了攀钢高钛型高炉渣的利用现状及存在的问题,综述了国内高钛型高炉渣制备光催化剂研究现状,认为高钛型高炉渣是一种具有光催化降解能力的材料,探索不同的方式进行改性以增强其光催化效应是未来制备优质高炉渣光催化材料的研究方向。同时,提出了高钛型高炉渣光催化材料应用方向和可能生产的环保产品。